How to Substitute a Jeep Cherokee Fan Clutch

away Gary Proulx

itstillruns article image

major traffic jam 2 image by Aaron Kohr from Fotolia.com

The mechanical winnow in your Jeep Cherokee uses a viscous seize to keep the engine within its normal operating temperature zone. A damaged OR defective devotee prehend can speedily lead to overheating. It is a good estimate to habitually audit the fan and its clutch, as it is difficult to detect any damage to the assembly by merely looking at it. With the engine off and cold, the winnow should freely rotate past hand. With the engine off and violent, the fan should exhibit whatever drag when turned by hand.

Stone's throw 1

Open the hood of your Cherokee. Remove the unfavorable battery clamp by using the wrench to change state the clamp nut in a counterclockwise direction. The dissident terminal is pronounced by a " - " symbol on the battery cause, dear the clamp.

Ill-use 2

Remove the winding-clothes climbing bolts from the top of the shroud away using the wrench to turn them counterclockwise. The shroud is the fictile enclosure which surrounds the fan. Pull the shroud up and finished the fan.

Step 3

Locate the grasp, which is bolted to the back of the fan. Take off the 4 grasp mounting bolts on the vertebral column of the clutch by turning them levorotary with the wrench. Remove the fan and clutch assembly from the engine compartment.

Stone's throw 4

Absent the bolts and nuts that attach the fan to the clutch away turn the bolts counterclockwise with the wrench. These bolts and nuts wish make up reused to mount the fan onto the new clutch.

Step 5

Place the fan onto the new clutch. Tighten up the fan climbing bolts and daft past turning them clockwise with the wring out.

Ill-use 6

Reinstall the four clutch climb bolts by turn them clockwise with the wrench.

Stair 7

Place the shroud rear into position. Reduce the sheet mounting bolts by turn them in a clockwise centering with the wrench.

Reconnect the negative battery clamp by turning the clamp nut clockwise with the wring out.

References

  • " Jeep Cherokee 1984 thru 2001, Haynes Repair Manual"; Bob Henderson and John H. Haynes; 2005

Tips

  • The prehend mounting bolts are small and easy to drop when removing. Identify a sheet or textile under the vehicle to arrive easier to find dropped balmy.

Things You'll Need

  • Wrench set

Warnings

  • Never bring on on or around the fan if the locomotive is moving.
  • Come not allow the fan to inherit contact with the radiator fins.

Writer Bio

Gary Proulx has been penning since 1980. He specializes in automotive vehicle technology and gas and diesel conception. Proulx has had multiple articles published happening diverse websites. He is also an archery expert World Health Organization writes some the ins and outs of archery as a sport.

More Articles

2001 Jeep Grand Cherokee Hydraulic Radiator Fan Problems

Source: https://itstillruns.com/replace-jeep-cherokee-fan-clutch-7236282.html